Model Number

ID

"ID" is a modular, totally insulated, enclosed distribution board system. Those enclosures as well as its transparent

covers are made from polycarbonate. It has advanced features because of its modular construction, high mechanical strength,

insulating performance, anticorrosion, antiaging, uninflammable, dustproof and spray proof. The degree of protection is up

to IP56. It is especially qualified for operation under very heavy environmental conditions, especially to highly

environmentally stressed locations such as oil fields(deserts), chemical industries, light textile, cement, use in harbor

areas(salty humidity), paper and grain processing plants, etc.

Functional Features

1.Materialk of the Enclosure cover: Makrolon 2805 Natur,(Polycarbonate)(Bayer – Product from Germany).
2.Material of the Base: Makrolon 8325 hgro7/051 (Polycarbafil) (Bayer product from Germany).
3. Makrolon is a noncrystalic thermoplastic material. It has particular intensity, rigidity, tenacity, crack and

resistance. According to different load, the products processing with non-reinforced grades can still keep the stability of

dimensions when the temperature achieves 135°C. For the products processing with reinforced grades, the temperature can

achieve 145°C. In addition it has a high impulse-voltage withstand. Therefore, this material is applicable for a wide

temperature range (up to 150°C)
1) Insulation
ID is developed as a totally insulated and modular low voltage distribution panel system. Its excellent insulation is the

important key for the electrical protection degree. In case live parts touch electric live parts there will no voltage be

spread or conducted to other enclosure places.
Further, Makrolon provides highest surface resistivity, dielectric strength and volume resistivity. Its relative dielectric

constant is "3" at 1000Hz according to the Germany industry standard DIN53483. These numerical values re not affected

through temperature and relative humidity.
2)Flame retardant property
The requirements for availability of flame retardant products are increasing more and more. The basic grade of Makrolon is

the flame retardant grade X-2 when the thickness of cross-section is 1.66mm or more than this. Some flame retardant grade

is X-D when the thickness of cross-section is 0.88mm or more than this or 1.6mm. Polycarbafil parts are W-1.
3)Stability under heating
According to the pressuring and sinking test with ball made according to German standard "VDE0470", the thermal property is

stable at the temperature is up to 150°C. Also, the ID systems material complies with the Northamerican Standard UL746B

and the IEC216.
4)Impact strength resistance, crack strength resistance
In actual use, parts often are impacted and shaked. The material of protection function must resist these pressures while

high and low temperature influence. It keeps safety from -40°C up to 120°C. It still does have a high impact strength

resistance.
5)Transparency
Transparent cover does reinforce the operation safety. The finished product allows observing all its components visually at

all times without disassembling the cover under permanent protection degree availability.
6)Chemical proof, corrosion
Makrolon is resistant to high concentration inorganic acid (such as carbonic acid), lactic acid, oleic acid, citric acid,

oxidant, reducer, natural liquor, acid, sault, all kinds of fat and oil.
7)Waterproof
The IP degree can achieve up to IP 65. It can efficiently prevent the water from jetting to the enclosures in any direction

without bad effects.

B. Busbar system
An ID system specific busbar system is available. It is convenient for quick and convenient access.  The dusbar surface is

standardly tin plated.

C. Connection Type
1. Cable connections are realized with terminal blocks. The terminals used by Zhenjiang Klockner-Moeller Electrical System

Co., Ltd., enclose the cable end "air tight". This prevents dysfunctions from corrosion during lifespan of the system.
2. The bottom plate with flange prevents entering small animal (i.e. termites) into the enclosure. It maintains the IP

degree at the point of cable entry.

D. Cabinet Type
1. Wall-mounting distribution boards
2. Free-standing distribution boards

Keywords:Low voltage products,low voltage system,low voltage systems,low Voltage Electrical System,low voltage distribution

system,switchgear,electrical switchgear,switchgear manufacturer,electric switchgear,switchgear manufacturers